PERFECTSEAL™ GASKET SYSTEM

Most major cold storage door manufacturers utilize a balloon type seal that is either attached to the jamb casing or the door panel. This type of seal is subject to wear and tear during normal operation and is easily damaged. Unlike traditional cold storage doors where the gasket is on the front face, the PerfectSeal gasket system utilizes a two-ply, fabric reinforced blade seal against the top and side edges of the door panel. This solves a number of issues including frequent replacement of worn out seals, wear and tear on sealing surfaces and gasket damage from impact. It also minimizes air infiltration and moisture problems common to traditional cold storage doors.

SLIDING DOOR TRACK AND HOLD CLOSE BRACKET

Sliding cold storage door systems have to stand up to extreme conditions and heavy usage every day. Our SD (standard duty) and EHD (extreme heavy duty) track systems have been designed to perform reliable for years with virtually no required maintenance. Our SD model is designed for smaller to midsize doors (6' wide or less) while the EHD model is ideal for any size door in the most abusive environment. An optional hood system is available with the EHD track. Manual doors come standard with an adjustable track mounted hold close bracket. The hold close device prevents “bounce back” on manually operated doors.

ROLLER ASSEMBLY

The roller assembly with built in anti-lift device allows for easy installation and will retain its adjustment even when the door is bumped, eliminating any secondary adjustments required. The jack bolt makes it is easy to raise and lower the door for proper height, making the door easy to open and close. Permanently lubricated rollers provide smooth, quiet performance.

THE PERFECT COMBINATION

Combine the PefectSeal gasket system with the ColdGuard track and eliminate the traditional “down and in” closing motion. Traditional cold storage doors have a track system that causes premature wear of the gaskets by pulling the panel down and in towards the gasket when closed. This ensures a positive seal, but makes the door difficult to open. The PerfectSeal gasket system eliminates the need for this, making the door easier to operate. Simple is better.

UNDER PANEL GUIDE SYSTEM

All ColdGuard cold storage doors incorporate an adjustable floor guide system that installs under the door panel. This concealed design eliminates the floor rollers that many cold storage doors require. The under panel guide is easy to install, can be adjusted for a perfect seal, and has a much cleaner look than bulky rollers that are prone to being hit by loads passing through the opening. For more details on this option view the installation video on www.chasedoors.com.

DESIGN FEATURES

• Specially designed gusseted steel corner brackets are machined to perfectly fit inside the profile of the FRP pultrusions, providing exceptional frame strength and eliminating the need for aluminum, wood and PVC bracing
• Unique design allows Non-CFC foamed-in-place polyurethane insulation to lock components in place with the fiberglass reinforced polymer (FRP), producing an extremely durable, insulated panel
• Door panels are available in 4" and 6" panel thickness with an R Value of 26 and 40, respectively
• Maintenance free heavy duty extruded aluminum track rail with two 70 pound capacity 1-1/4" wide x 4" diameter double ball bearing polyurethane rollers, rollers backed with lifetime warranty
• Heavy duty UHMW under-panel track guides with stainless channel guide the sliding panel as it opens and closes
• Freezer doors have perimeter heat to prevent moisture or ice buildup
• Electric models feature a manual emergency release on both sides of the door to allow access during power failure, all freezer doors are ETL listed
• All door components including track, panel gasket system and optional operator are designed to provide years of trouble free service
• Factory tested and shipped ready for installation
• All doors are custom manufactured to your exact requirements

OPTIONAL OPERATORS

• Standard 1900-RLS-M Operator
• NEMA 1 Standard (NEMA 4 optional)
• Enclosed, fan cooled, 1/2 HP, instant reversing, electric motor operating up to 18" per second (single), 36" (bi-parting)
• Panel mounted reverse edges
• Heavy duty enclosed gear drive with adjustable torque limiter
• Manual disconnect including inside safety release
• Pre-wired and pre-mounted control panel
• 208 / 230 / 460 bolt incoming 3-phase power standard
• UL listed and labeled control panel
• 1900-RLS Operator
• NEMA 4 enclosure, suitable for washdown applications
• Variable speed motor (up to 40" per second for single up to 80" per second for bi-parting)
• Soft start / stop feature
• Pre-wired and pre-mounted control panel
• 120 of 240 volt incoming single phase
• UL listed and labeled control panel
• Options for Motor Operated Doors
• Radio control, motion detection, photo eyes, induction floor loop activators
• 3 button control station
• Time delay close
• Nema 4 control box