MODEL 44SSFH-LP FISH PROCESSING BAND SAWS

The BIRO 44SSFH-LP is a Heavy Duty, Stainless Steel, Fixed Head, Low Profile, Fish Processing Saw. See Specifications for various Models and Options available.

 

SPECIFICATIONS

Models

Model 44SSFH-LP-PGF

Model 44SSFH-LP-FS-R

Model 44SSFH-LP-HDFFT

 

Motors

HP	KW	TYPE	VOLTS	AMPS	HERTZ	PH	STATUS
5	3.7	MR	208-220/440	15.7-14.8/7.9	60	3	STD
5	3.7	MR	575	5.9	60	3	EC
5	3.7	MR	220/380-415	17.8/10.3-9.4	50	3	EC

STD = Standard     EC = Extra Cost     MR = Moisture Resistant

 

Construction

Stainless steel unitized base, head and door structure; legs, channel, assembly tables; some components non S.S.

Standard Equipment

Two saw blades • Operation and Safety manual • Safety wall poster • Safety end cut pusher plate (except fixed table saw)

Saw Blade

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
135” (3429mm) L x 5/8” (16mm) W x .018 (.45mm) thick -hard tooth	135” (3429mm) L x 5/8” (16mm) W x .022 (.56mm) thick -hard tooth	135” (3429mm) L x 5/8” (16mm) W x .022 (.56mm) thick -hard tooth

 

Blade Guide

Upper and lower blade backup guide assemblies, with carbide long-life inserts, removable as an assembly

Blade Speed

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
Approx. 5000 (1524m) feet per minute	Approx. 4000 (1219m) feet per minute- higher f.p.m. blade speed available	Approx. 4000 (1219m) feet per minute- higher f.p.m. blade speed available

Blade Wheels

18” (457mm) single flange, cast iron, nickel plating, upper wheel assembly removable – Opt. S.S. blade wheels available

Blade Guide Bars

Double (reinforced) stainless steel saw guide bars

Blade Tension

Factory preset tension spring in housing with screw tensioning handle, located under upper wheel

Blade Cleaning Unit

Stainless steel body with long-life carbide guide inserts, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjusted as a unit)

Bearings

Heavy duty tapered roller bearings used in upper saw wheel hub and lower bearing housing assembly

Dust Catch Pan

Deep rounded corners poly pan sealed off from other areas of base structure, accessible through hinged door

Drive System

Tension adjustable, non-slip, silent V-belt

Meat Carriage

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
25½” (647mm) L x 17½” (444mm) W stainless steel with 8, 1-7/16” diameter; (36.5mm) stainless steel EZ-flow bearings	25½” (647mm) L x 17½” (444mm) W stainless steel with 8, 1-7/16” diameter; (36.5mm) stainless steel EZ-flow bearings	Not applicable

 

Legs

Stainless steel welded legs with 4 adjustable leg bolt levelers

Motor Compartment

Sealed off from meat contact areas, easily accessible through removable panel door

Platter

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
Right rear platter stationary, left rear platter removable	Stainless steel rear platter, removable by releasing push-pull hold down rods	Stainless steel rear platter, removable by releasing push-pull hold down rods

 

Power Switch

Watertight magnetic with thermal overload and under voltage protection

Pusher Plate

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
Standard	Standard	Not applicable

 

Meat Gauge Plate

Model 44SSFH-LP-PGF	Model 44SSFH-LP-FS-R	Model 44SSFH-LP-HDFFT
Not applicable	Adjustable from 1/16” (1.6mm) to 6½” (165mm) locks in position; assembly removable for cleaning	Not applicable

 

Options (Extra Charge)

Power cord (12ga.) and plug: S.S. saw blade wheels for 5/8” (16mm) saw blade, Cast saw blade wheels for 1” (25.4mm) saw blade; Longer S.S. hex (leg) bolts

Certifications

N.S.F. • U.S.D.A.

Weight

Uncrated: 600 lbs. (272kg); Crated: 700 lbs (318kg); Dims. Crated: L 54” (137cm) x W 45” (114cm) x H 83” (211cm)

All weights and dimensions are approx. depending on design and options selected

Legend

FH = fixed head; FS = fish steaking; HDFFT = heavy duty fixed front table; LP = low profile; PGF = precision gauge fence; R = retailing; S.S. = stainless steel

Item Number

LIT-44SSFH-LP-375